The previously used SmartSensor cable has six twisted pairs of wire. Each pair is composed of a black and a red wire, accompanied by a drain wire and surrounded by a shield. A numeric label (1 through 6) identifies each pair of black (B) and red (R) wires. This diagram shows the 26-pin socket assignment for the cable and the appropriate connection inside the cabinet for each wire. The codes listed in the diagram are to be used to solder wires into the back of the plug where the letters represent the individual solder cups.
This figure shows the wiring diagram for the Click 200 surge protector.
The previously used SmartSensor cable has six twisted pairs of wire. Each pair is composed of a black and a red wire, accompanied by a drain wire and surrounded by a shield. A numeric label (1 through 6) identifies each pair of black (B) and red (R) wires. This diagram shows the 26-pin socket assignment for the cable and the appropriate connection inside the cabinet for each wire. The codes listed in the diagram are to be used to solder wires into the back of the plug where the letters represent the individual solder cups.
This figure shows the wiring diagram for the Click 200 surge protector.
The previously used SmartSensor cable has six twisted pairs of wire. Each pair is composed of a black and a red wire, accompanied by a drain wire and surrounded by a shield. A numeric label (1 through 6) identifies each pair of black (B) and red (R) wires. This diagram shows the 26-pin socket assignment for the cable and the appropriate connection inside the cabinet for each wire. The codes listed in the diagram are to be used to solder wires into the back of the plug where the letters represent the individual solder cups.
This figure shows the wiring diagram for the Click 200 surge protector.
The previously used SmartSensor cable has six twisted pairs of wire. Each pair is composed of a black and a red wire, accompanied by a drain wire and surrounded by a shield. A numeric label (1 through 6) identifies each pair of black (B) and red (R) wires. This diagram shows the 26-pin socket assignment for the cable and the appropriate connection inside the cabinet for each wire. The codes listed in the diagram are to be used to solder wires into the back of the plug where the letters represent the individual solder cups.
This figure shows the wiring diagram for the Click 200 surge protector.
The following shows how to wire a Wavetronix 8-conductor cable into a Click 200. If you are using an older 9-conductor cable, be aware of the following differences:
