Join our mailing list and we’ll let you know when a training event is occuring near you.
Just let us know when and where.Contact Us
Learn the basics of how radar is used in the traffic industry.
In this workshop, you will learn the basics of radar technology and how it is revolutionizing the traffic detection industry. Live demonstrations will show you how radar works, and the difference between frequency and bandwidth. You’ll become familiar with different types of traffic radar and which type would work for you.Hide
Learn how to properly install and configure the SmartSensor HD.
This course will teach you how to properly install the SmartSensor HD so that you get accurate detections in your freeway and midblock applications. You will learn how to use the SmartSensor Manager HD software to configure lanes, bins, and approaches. You will also go over the steps you take to check/verify and adjust sensor detections and reported data.Hide
Learn how the SmartSensor HD can improve your ITS system.
This workshop will teach you about our most popular sensor—the SmartSensor HD. You will learn how to improve your ITS system by detecting up to 22 lanes of traffic using the only radar traffic detector that offers true high definition. In addition to the easy installation and configuration of the sensor, you will discover the many different applications of the SmartSensor HD, including ramp metering, incident management, and trip times.Hide
Learn how the SmartSensor Advance can increase safety and efficiency at the intersection.
In this workshop, you will learn how to increase the safety and efficiency of your intersection. From installation to configuration, we will show you the basic features and functionality of the SmartSensor Advance. You’ll learn when and where it can be used, and how it will decrease the number of dangerous situations at the intersection.Hide
Learn how the SmartSensor Matrix can improve intersection efficiency.
In this workshop, you will learn how to accurately detect the presence of moving and stopped vehicles at the intersection using Radar Vision. This workshop will explain the basics of radar technology that the SmartSensor Matrix uses to create a two-dimensional image of the intersection. You will also learn how to install the sensor, and how to configure it for your specific needs.Hide
Learn how to configure the SmartSensor Matrix.
Learn how the SmartSensor Matrix is installed and aligned to the intersection stop bar. Become familiar with the SmartSensor Manager Matrix software and how it's used to configure the SmartSensor Matrix. Set up zones, map zones to channels, understand the output settings and how to verify accuracy of detections.Hide
Learn how to configure the SmartSensor Advance to make your intersections safer and more efficient.
Learn how to identify a suitable location for a SmartSensor Advance installation and then understand how to align the sensor to achieve the most accurate detections. Learn the different options SmartSensor Manager Advance software offers for configuring the SmartSensor Advance. Place detection zones, set speed and ETA criteria and learn what other filters are available. Change specific settings to see how detections are affected. Check and verify accuracy.Hide
Learn how to set up the SmartSensor V and start detecting traffic.
Learn how to troubleshoot the SmartSensor HD, Matrix, and Advance.
Learn the correct procedures for troubleshooting the SmartSensor HD, SmartSensor Matrix and SmartSensor Advance. Know what the multimeter readings should be and what it means when the readings are off. Learn how to check and understand the status of the sensor, zones, channels, and controllers.
To enroll in this course, you must first successfully complete:
SmartSensor HD Certified Training
SmartSensor Matrix Certified Training
SmartSensor Advance Certified TrainingHide
Learn about the devices that support the Wavetronix SmartSensors.
Learn about the cabinet devices that provide power and communication to the SmartSensors.
Learn about the devices that go in a cabinet to support SmartSensors, namely the Click 600 and Click 650, which combine power, surge protection, and communication functions in a single device. In this course you will be able to perform the necessary steps to install a cabinet interface device and configure it using on-device features and the web interface.Hide
Learn about the Command Suite and how it can be used to monitor your sensors.
Learn about any or all of the Command applications.